3/4-1″ Service Line Puller Kit

Description

Waterworks Tool Company 3/4-1″ Service Line Puller Kit

• With our service line puller kits you get all the parts & tools you need to push out old lines while pulling in a new line. For plastic pipe we simply put a plastic pipe splitter in front of our split bullhead. We use a split bullhead so you can clamp onto the cable. If our competitors cable breaks you need a new cable.
• If you break our cable you can still mount the split bullhead to it, providing it is long enough. The back of the split bullhead has a 1″ FEIP thread to adapt to our plastic adapter, or your flared or compression male adapter.
• We also include a starter tool, used to make sure that the old service line will start moving through the foundation or cellar wall. Our cable grab has a large oval link attached to it with a hammerlock. This link can be attached to a chain or directly onto a backhoe bucket tooth.

*NOTE* 3/8 cable has a safe working load limit of 3600 lbs. The cable grab used with this kit has a safe working load limit of 4400lb, therefore the cable should break before the grab, if you exceed the safe working load limit. Cables and cable grabs are not guaranteed against breakage. There are too many variables with hydraulic pressures of excavators and backhoes, and other factors such as, soil conditions, and unknown couplings and or other fittings in the line. Most municipalities achieve 80-90% of their pulls, when done properly.

Kit includes:

• Cable grab
• 2″ screw-on bull head
• 1½” screw-on bull head
• 1¼” screw-on bull head
• Starter tool
• 50′, 75′, or 100′ cable
• Heavy duty bag